Truck Mounted Drill

Truck Mounted Drill

Model No.︰WZJ5090DZJ

Brand Name︰Cohesion

Country of Origin︰China

Unit Price︰-

Minimum Order︰1 pc

Inquire Now

Product Description

I. Main features:

 

1. This vehicle uses dual power drive, the power of the vehicle and the power for the special device of the drill work separately. The vehicle uses Dongfeng ground car chassis 4×4 dual bridge drive, with carrying capacity of 5 tone and 6 persons. The special part for the drill is fully driven by hydraulic, and it is hydraulically powered by the 4100P type diesel engine, which favors to reduce wearing the vehicle engine and saving fuel to a large extent.

 

2. Fully utilize the transmission of the hydraulic system to realize the combination of multi-mechanism movement, which concentrates various functions of static rotary, vibration impact with rotary, rope oscillating weight impactand static sounding together on one drill. It can be connected with the DTH hammer for down-the-hole drilling. The machine has a high suitability and can be used for multi purpose.

3. It is the first master piece in domestic and abroad to combine the rotary power unit with the vibratory hammer and it can be moved away from the hole sit in transverse direction. This machine solve the difficulty that in domestic and abroad, the drill can only vibrate which can not impact and rotate, if the vibrator should be used the same shall be installed additionally. It strengthens the capability of drilling-in and casing, favors fixing and dismantling the drill rod, shorten the operation time of lifting the drill, it has a significant effect on handling the geological stratification with cobble stone and gravel, as well as handling the accident during the underground drilling.

 

4. It uses drill rod connector to directly connect the drill rods, so that during the drilling work, it dose not require fixing or dismantling any of the other drilling tools on the Kelly.

5. Strong plus pressure, strong elevation force, large output torque and strong drilling capacity can satisfy the demand for deep hole drilling.

6. Each kind of the mechanism is controlled hydraulically with high mechanization, operation is safer, more flexible, more comfortable and faster.

7. The rotary power unit is mechanically second gear infinitely variable speeds.

8. The winding machine is hydraulically driven with mechanically second gear variable speeds.

II. Main functions:

1. This machine can satisfy the demand for prospecting and in-situ test of various kinds covered geological stratification during the Quaternary period, it is wildly used for industry, civil works, military facilities and roads, rail ways, bridges, water conservation, electric power, coal main, geological minerals, petroleum, sea port, municipal facilities, geophysical prospecting blast holes and basement rock drilling etc.

2. It has multi functions of static pressure, rotary, vibration strike, impact and static sounding etc.:

A. Static pressure: it is used in a softer stratum; it drills in by pressing-in method and undisturbed sampling under static pressure (when necessary, static pressure with rotary is allowed).

B. Rotary with static pressure: it is used in drilling with various kind of clay, sand layer above the underground water level and weathered belt of the basement rock.

C. Vibration strike: it is used in drilling and casing with loosen sand, cobble stone and gravel layer etc.

D. Vibration strike with static pressure: improve and heighten the drilling performance and work efficiency of type A and C.

E. Static pressure, rotary with vibration strike: it is the optimal method used for drilling with complex stratum.

F. Rope oscillating weight impact: when drilling with method C is very slow, drilling with oscillating weight impact will be used, meanwhile undisturbed sampling with hammering method and dynamic sounding can be carried out, as well as the standard penetration test.

G. Static sounding in-situ test.

H. Rotary used in conjunction with slurry pump can be used for the drilling of rock, slurry wall for loosen stratum of the Quaternary period and deep hole drilling in.

I. Down hole bumping drilling: drilling by using the DTH hammer with compressed air.

Product Image